Crankshaft Repair at Low Cost

Crankshaft repair is required in case of following observations:

I) Development of taper and ovality due to continuous running.

II) Seizure of bearing, increase in hardness and development of crack

III) Loss of alignment of crankshaft or change in web deflection of crankshaft and many more reasons

RA Power Solutions Pvt. Ltd. undertakes crankshaft repair. We have team of experienced technicians who undertake crankshaft repair onsite.

These days there is no need of removing the crankshaft from the Engine block and send it to workshop for crankshaft repair.

RA Power Solutions undertakes crankshaft repair, crankshaft grinding and crankshaft polishing onsite without removal of crankshaft from the engine block. The onsite repair of crankshaft not only reduces the downtime but saves considerable cost in terms of removal of crankshaft, packing, transportation etc.The sending of  crankshaft to the workshop now is outdated.

RA Power Solutions have facility to undertake onsite crankshaft repair from 50 mm to 700 mm diameter.

Damaged Crank Pin of MAN Diesel Engine
Damaged Crank Pin of MAN Diesel Engine
Crack Detection of Crankpin Before Grinding
Crack Detection of Crank-pin Before Grinding








Having more than 37 yrs of experience, we have highly skilled in house technicians to execute crankshaft repair.We are most respected and cost effective company in Asian region.  We also manufacturer crankshaft repair machine/crankshaft grinding and polishing machine which is light weight, easy to operate.

Crankshaft Grinding of Damaged Crankpin on Board the Vessel
Crankshaft Grinding of Damaged Crank pin on Board the Vessel
Crankshaft Repair on Board the Vessel
Crankshaft Repair on Board the Vessel








The range of machine is from 50 mm to 700 mm which is reasonably priced and we have sold more than 63 machines all over the world.

Crack Detection of Crankpin After Grinding
Crack Detection of Crank pin After Grinding
Crankpin After Grinding
Crank-pin After Grinding








Author of this blog is Raj Shahani, Managing Director of RA Power Solutions Pvt. Ltd. having experience of more than 36 years. Company deals in onsite crankshaft grinding, crankshaft repair, rebabbitting of bearings, metal stitching/metal locking of cast iron, connecting rod repair, etc.

Leave a Reply

Your email address will not be published. Required fields are marked *