Metal locking of Engine Block by Experienced Technicians

An engine block of Wartsila 18V32 was reported damaged by South American power plant due to failure of connecting rod. The engine was just out of warranty and the cost of bare engine block quoted was exorbitant with the delivery time 9 months.

RA Power Solutions technicians have successfully undertaken the repair of damaged engine block of Wartsila 18V32 by metal locking and metal stitching process. The block was repaired while it was on the foundation and without disassembly of crankshaft and major components. The damaged portion was measuring 72 inches X 42 inches approx.

Metal locking and metal stitching is executed by experienced engineers having record of repairing engine block and major engine components exceeding more than 1300 numbers in last 40 years.

 A cost effective, quick in response and sincerity are the main advantages of getting repairs done by RA Power Solutions.

For more details regarding Metal Stitching/Metal Locking in Low Price, email us your query on info@rapowersolutions.com

An engine block of Wartsila 18V32 was reported damaged by South American power plant due to failure of connecting rod. The engine was just out of warranty and the cost of bare engine block quoted was exorbitant with the delivery time 9 months. RA Power Solutions technicians have successfully undertaken the repair of damaged engine … Continue reading “Metal locking of Engine Block by Experienced Technicians”

Cast Iron Crack Repair by Metal Stitching Process

Cast iron crack repair by metal stitching and metal locking process is highly recommended. Metal stitching process for repairing casting is widely use, accepted in the industry and more successful process for repairing cracks in cast iron.

Broken cast iron pieces can also be replaced by new piece of casting undertaking metal locking. This technology is as old as introduction of cast iron casting in industry.

Insertion of Casting Piece in Engine Block
Insertion of Casting Piece in Engine Block
Metal Stitching of Jenbacher Engine Block in Process
Metal Stitching of Jenbacher Engine Block in Process

 

 

 

 

 

 

 

Metal keys and metal locks are used to undertake crack repair in cast iron casting.

Metal keys and Metal Locks are used in Metal Stitching/Locking Process
  Metal keys and Metal Locks used in Metal Stitching/Locking Process

RA Power solutions Pvt. Ltd. has team of trained technicians who undertake metal stitching of broken and crack casting onsite. Necessary tools, consumables and new piece of casting if required are taken to the site and crack repair is executed. There is no requirement for disassembly of the equipment or transporting it to the repair workshop as crack repair is done onsite.

Metal Stitching Done in Broken Area of Generator
Metal Stitching Done in Broken Area of Generator

It is proved that repair of crack casting by metal stitching process rather enhances the strength of the area after crack repair by the metal stitching is done. We execute crack repairs on board the vessel, power plants all over the world.

Cast iron crack repair by metal stitching and metal locking process is highly recommended. Metal stitching process for repairing casting is widely use, accepted in the industry and more successful process for repairing cracks in cast iron. Broken cast iron pieces can also be replaced by new piece of casting undertaking metal locking. This technology … Continue reading “Cast Iron Crack Repair by Metal Stitching Process”