Tag: metal stitching

Metal Stitching and Thread Repair Inserts – RA Power Solutions

RA Power Solutions was informed by one of our client regarding damage of cam case cover of MAN diesel engine on board a vessel sailing near China. The details including photographs were examined, and it was observed while the cam case cover was broken into pieces the threads on the engine body and the dowel pin were also damaged.

Cracked Housing of Engine Block
Cracked Housing of Engine Block
Broken Area
Broken Area
Damaged Upper Threads
Damaged Upper Threads

RA Power Solutions deputed their team of technicians on board the vessel, and they executed the repair of engine block, cam case cover sitting area by the following procedure:

  • The broken bolt which remained inside the thread hole was drilled out.
  • The damaged threads on cam cover sitting area on entablature was removed by drilling new blind holes, suiting the new M12 Helicoil thread inserts.
  • Re-tap holes for the new M12 Helicoil thread inserts was done carefully.
  • New M12 Helicoil thread inserts were installed in the engine frame/ entablature.
  • The 2 guide pins for the roller guide housing were removed, taking due precaution.
  • New roller guide housing was installed, with correct M12 hexagon bolts and including the newly introduced 10 mm washers.
  • After final alignment of the roller guide housing, the bolts were tightened with the correct tightening torque.
  • Finally, the two ø8 mm guide pinholes were drilled in both roller guide housing and engine frame and afterwards new guide pins were installed.
repair of Threads on Engine Block Under Process
repair of Threads on Engine Block Under Process
Repair of Thread Hole by Metal Stitching
Repair of Thread Hole by Metal Stitching

The repair of threads by thread repair inserts (helicoil inserts) proved to be successful as the engine is performing satisfactory and no oil leakage is observed. The shipping company owners were asked to replace the complete engine block by the manufacturers as per them it was not possible to execute this kind of repair.

Damaged Thread Hole Under Metal Stitching and Metal Locking
Damaged Thread Hole Under Metal Stitching and Metal Locking
Metal Stitching of Bottom Area of Threaded Hole to Give Extra Strength
Metal Stitching of Bottom Area of Threaded Hole to Give Extra Strength

The above job was successfully executed by a team of experienced and dedicated team of RA Power Solutions.

The author is Mr. Raj Shahani Managing Director of RA Power Solutions having experience of almost four decades of working on high-capacity diesel engines, turbines and rotary equipments. The company specializes in executing the repairs i.e. metal stitching and metal locking, cold metal stitching engine block, grinding and repair of crankshafts, rebabbitting of bearings, connecting rod reconditioning, and overhauling of Engines which have serious problem resulting to the immense saving to the owners.

Cam Cover Sitting Area of Engine Block After Repair
Cam Cover Sitting Area of Engine Block After Repair

For more on metal stitching and metal locking, metal stitching of engine block contact us today email us at rajshahani@rapowersolutions.com, info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

RA Power Solutions was informed by one of our client regarding damage of cam case cover of MAN diesel engine on board a vessel sailing near China. The details including photographs were examined, and it was observed while the cam case cover was broken into pieces the threads on the engine body and the dowel … Continue reading “Metal Stitching and Thread Repair Inserts – RA Power Solutions”

Cast Iron Crack Repair by Metal Stitching Process | Cast Iron Metal Stitching

Cast iron crack repair by metal stitching and metal locking process is highly recommended. Metal stitching process for repairing casting is widely use, accepted in the industry, and more successful process for repairing cracks in cast iron.

Broken cast iron pieces can also be replaced by new piece of casting undertaking metal locking. This technology is as old as introduction of cast iron casting in industry.

Insertion of Casting Piece in Engine Block
Insertion of Casting Piece in Engine Block
Metal Stitching of Jenbacher Engine Block in Process
Metal Stitching of Jenbacher Engine Block in Process

Metal keys and metal locks are used to undertake crack repair in cast iron casting.

Metal keys and Metal Locks are used in Metal Stitching/Locking Process

RA Power Solutions Pvt. Ltd. has a team of trained technicians who undertake metal stitching of broken, crack casting onsite and crack repair by metal stitching. Necessary tools, consumables, and a new piece of casting if required are taken to the site and crack repair is executed. There is no requirement for disassembly of the equipment or transporting it to the repair workshop, as crack repair is done onsite.

Metal Stitching Done in Broken Area of Generator
Metal Stitching Done in Broken Area of Generator

It is proved that repair of crack casting by metal stitching process rather enhances the strength of the area after crack repair by the metal stitching is done. We execute crack repairs onboard the vessel, power plants all over the world.

Metal Stitching Service Provider

We extend metal stitching services for the repair of cracks in Grey Cast Iron, Aluminium, and Cast Steel Components. The repair of crack and damage casting by metal stitching and metal locking is the proven method to save the crack component from rejection. These days it is very difficult to arrange for a new component which is not only expensive but is difficult to arrange due to travel restriction. The best way to reduce the cost of maintenance is to get the crack or damage in Grey Cast Iron, Aluminium, and Cast Steel components by metal stitching, metal locking, and metal surgery process. Our dedicated team of technicians with portable tools is ready 24*7 to extend these services all over the world.

We extend metal stitching services all over the world including countries like Madagascar, Oman, Qatar, Philippines, Bahrain, Srilanka, Bangladesh, Myanmar, Turkey, Nigeria, Greece, Saudi Arabia, UK, Dubai, Malta, and Cyprus.

For more information on crack repair by metal stitching, cast iron repair, cast iron stitching, repair cast iron, cast iron metal stitching services, crack repair in cast iron, and repairing cast iron metal lock contact us at rajshahani@rapowersolutions.com or info@rapowersolutions.com or call us at +91 9582647131, or +91 9810012383.

Cast iron crack repair by metal stitching and metal locking process is highly recommended. Metal stitching process for repairing casting is widely use, accepted in the industry, and more successful process for repairing cracks in cast iron. Broken cast iron pieces can also be replaced by new piece of casting undertaking metal locking. This technology … Continue reading “Cast Iron Crack Repair by Metal Stitching Process | Cast Iron Metal Stitching”