Reconditioned of Connecting Rods Archives

Connecting Rod Repair | Reconditioning of Connecting Rod – RA Power Solutions

At RA Power Solutions, we specialize in precision reconditioning and repair of connecting rods for high-capacity marine, power plant, and industrial diesel engines. With over four decades of experience, our in-house services ensure performance restoration, cost efficiency, and uncompromising safety.

Reconditioned Connecting Rods of MAK Engine in Stock

Why Reconditioning Matters

Connecting rods face immense stresses—from piston movement and combustion forces to high RPMs. Over time, this leads to:

Taper and ovality in both big and small end bores
Misalignment and bent structures
Fatigue damage to serrations, bolts, or bushes

We do not recommend repairing a connecting rod if we find any loss of alignment or cracks. RA Power Solutions guarantees the satisfactory performance of every connecting rod we repair. We issue a calibration certificate for each connecting rod after repair.

Reconditioned Connecting Rod of Allen Engine in Stock

Built to Deliver Value:

Benefit	What It Means for You
Cost Savings	Reconditioned rods cost typically 25–33% of new OEM parts
OEM-Grade Quality	Repairs done to original specifications ensure reliable performance
Fast Turnaround	In-house facility and on-site services cut downtime dramatically
Global Reach	We export reconditioned rods globally—from ship yards to power plants
Trusted Guarantee	Performance-backed by certification and meticulous quality control

Who We Serve:

We export connecting rod of engines like Ruston, Allen, B&W, DAIHATSU, MAN, Mirrlees Blackstone, Niigata, Caterpillar, Deutz, Wartsila, Sulzer, Yanmar, Bergen, Mitsubishi, Cummins, etc.

For more information on connecting rod reconditioning services, maintenance and repair services, engine block repair, and connecting rod replacement, please email us at rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Reconditioning of Connecting Rod is in Process

Connecting Rod of Yanmar Engine Ready for Inspection Before Reconditioning

FAQs:

1. How do I know when a connecting rod needs reconditioning?

Look out for engine noise, vibration, oil contamination, or routine inspection findings like ovality or taper in rod bores.

2. Can every connecting rod be repaired?

No—if the rod is bent or has significant cracks, especially near the bolts or serrations, replacement is safer than reconditioning.

3. What types of engines can you service?

We support a wide range—including MAN, B&W, Wartsila, MAK, Deutz, Daihatsu, Yanmar, Mitsubishi, Caterpillar, and many others.

4. How much cost savings can I expect?

Reconditioned rods usually cost 60–70% less than new OEM replacements.

5. Are your services available globally?

Yes—our onsite crankshaft repair and inspection teams operate worldwide, offering rapid response and minimizing downtime.

At RA Power Solutions, we specialize in precision reconditioning and repair of connecting rods for high-capacity marine, power plant, and industrial diesel engines. With over four decades of experience, our in-house services ensure performance restoration, cost efficiency, and uncompromising safety. Why Reconditioning Matters Connecting rods face immense stresses—from piston movement and combustion forces to high … Continue reading “Connecting Rod Repair | Reconditioning of Connecting Rod – RA Power Solutions”

Reconditioned of Connecting Rods and Repair | Engine Connecting Rods

RA Power Solutions is a leader in undertaking repair and reconditioning of connecting rods of high-capacity engines installed in diesel engine power plants, ships, and for other applications.

Reconditioning of connecting rod and repair methodology have been developed by using latest breed of equipment and our experience of four decades in this field.

Inspection of Connecting Rods — **Marine Engine Connecting Rods under Reconditioning**

We strongly recommend our customers to use reconditioned connecting rods. We thoroughly check and repair them in our workshop while maintaining the original tolerances.

Why Choose Reconditioned Connecting Rods?

Ready Availability: We stock reconditioned rods for popular engine brands such as MAN-B&W, Sulzer, Wartsila, MAK, Caterpillar, Deutz, Daihatsu, Yanmar, Bergen, Mitsubishi, Paxman, Mirrlees, and many more—all ready for quick dispatch.
Guaranteed Quality: Each rod undergoes a qualified repair process, strict quality checks, and output from metallurgical examination—then is issued with a calibration certificate ensuring performance equivalent to new rods.
Significant Savings: Reconditioned rods cost approximately 25% of new OEM parts, delivering enormous cost advantages for owners.

Second Hand Connecting Rod of Wartsila Engine

Second Hand Connecting Rod of CAT Engine

Trusted Worldwide & Fully Supported

The availability of reconditioned connecting rod gives ship operators and diesel power plant owners access to low cost. Reconditioned connecting rods which are equivalent to the new one in terms of tolerances, performance, and life cycle.

RA Power Solutions is an experienced and respected company in the field of diesel engines. We strongly recommend using reconditioned connecting rods. We guarantee their quality through our controlled and approved repair process, advanced technology, and metallurgical examination during and after reconditioning.

The price of reconditioned connecting rods is about one-fourth of a new one. This results in enormous savings for the owners.

For more information regarding marine engine spares, new connecting rods, and reconditioned connecting rods & engine connecting rods of all makes and models of diesel engine, please feel free to write us at rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Inspection of Wartsila Engine Connecting Rod

FAQs:

1. What is a reconditioned connecting rod?

A reconditioned connecting rod is a used rod restored to original manufacturer tolerances through precision machining, inspection, and repairs.

2. Are reconditioned connecting rods as reliable as new ones?

Yes. We follow a controlled repair process, advanced technology, and metallurgical inspections to ensure they perform like new rods.

3. How much can I save by using reconditioned connecting rods?

You can save up to 75% compared to buying a new OEM connecting rod.

4. Do you stock reconditioned connecting rods for all engines?

We keep a ready stock for the most popular diesel engine brands and can also supply specific rods quickly if not in stock.

5. Do reconditioned connecting rods come with a warranty or certification?

Yes. Each reconditioned rod is supplied with a calibration certificate and quality assurance documentation.

RA Power Solutions is a leader in undertaking repair and reconditioning of connecting rods of high-capacity engines installed in diesel engine power plants, ships, and for other applications. Reconditioning of connecting rod and repair methodology have been developed by using latest breed of equipment and our experience of four decades in this field. We strongly … Continue reading “Reconditioned of Connecting Rods and Repair | Engine Connecting Rods”

Connecting Rod Reconditioning – RA Power Solutions

Engines are the most important parts of heavy-duty industrial machinery, ships, and power plants. The connecting rod is one of the most important parts of an engine. It is very important for moving the combustion force from the piston to the crankshaft. Over time, these rods are put under a lot of stress, fatigue, and heat, which causes them to wear out and possibly break.

Connecting Rod Assembled with Piston After Repair

Rather than replacing connecting rods — which can be expensive and time-consuming — connecting rod reconditioning offers a cost-effective and reliable solution.

At RA Power Solutions, we offer world-class reconditioning services that restore the connecting rod to its original specifications and performance levels.

What Makes Reconditioning Necessary?

During engine operation, the connecting rods face:

High mechanical stress from piston motion
Thermal expansion and contraction
Wear and tear at the small and big end bearings
Cracks or distortion due to oil starvation or overloading

If these problems aren’t fixed, they could cause serious engine damage, such as a crankshaft failure, a piston seizure, or even a complete engine breakdown. That’s why it’s important to recondition things on time to avoid expensive repairs or replacements.

Detailed Reconditioning Process at RA Power Solutions

1. Initial Cleaning and Visual Inspection

Onsite connecting rod repair are cleaned and inspected for any visible signs of cracks, scoring, discoloration, or deformation.

2. Dimensional Analysis

We check for:

Ovality or taper in the big and small ends
Rod length
Bend and twist
Bore misalignment

All measurements are compared with OEM tolerances.

3. Crack Detection

Using Non-Destructive Testing (NDT) methods like Magnetic Particle Inspection (MPI), we detect micro-cracks or structural flaws.

4. Big End and Small End Machining

If the big and small end bores are not round, we re-machine or hone them. If the bush on the tiny end is worn out, it is taken out and replaced with a new one that is the right size.

5. Replacement of Worn Components

We replace connecting rod bolts, nuts, and bushings using certified OEM or equivalent parts to ensure integrity under high load.

5. Straightening and Alignment

Using jigs and hydraulic presses, we realign the rod to original specifications, correcting any bend or twist developed during operation.

6. Final Inspection and Quality Control

Every reconditioned rod is tested for:

Dimensional accuracy
Surface finish
Bolt torque
Structural integrity

Benefits of Choosing RA Power Solutions for Reconditioning

Cost Saving: Reconditioning is 60–70% cheaper than replacement.
OEM Precision: We restore parts to manufacturer specs.
Rapid Turnaround: Save time, especially for critical engines.
On Site Service: No disassembly or transport delays.
Experienced Technicians: 45+ years in engine component repair.
Sustainable Choice: Minimizes industrial waste and promotes part reuse.

Contact us for more information on onsite connecting rod repair, repair of crankshaft at rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Frequently Asked Questions (FAQs):

Q1. How do I know if my connecting rod needs reconditioning?

Look out for signs like abnormal engine noise, vibration, worn bearing surfaces, or metal particles in oil. An inspection during engine overhauls is highly recommended.

Q2. Is connecting rod reconditioning safe?

Yes, when done by experts using precision tools and NDT testing, reconditioned rods are as safe and reliable as new ones.

Q3. What engines do you service?

We work on all major makes, including MAN, Wartsila, Caterpillar, MAK, Daihatsu, Yanmar, SKL, Deutz, and more.

Engines are the most important parts of heavy-duty industrial machinery, ships, and power plants. The connecting rod is one of the most important parts of an engine. It is very important for moving the combustion force from the piston to the crankshaft. Over time, these rods are put under a lot of stress, fatigue, and … Continue reading “Connecting Rod Reconditioning – RA Power Solutions”

Connecting Rod Inspection – A Critical Step in Engine Overhaul By RA Power Solutions

The connecting rod is an important component of engine operation. It connects the piston to the crankshaft, converting the piston’s linear action into rotational motion. Over time and with continuous engine use, the connecting rod experiences high amounts of tension and wear. This makes routine inspection and maintenance of the connecting rod essential to ensure engine reliability and performance.

At RA Power Solutions, we specialize in precision inspection and repair of connecting rods for marine engines, power plants, and industrial diesel engines.

Why is connecting rod inspection important?

A damaged or worn-out connecting rod can lead to serious engine problems such as:

Excessive vibration
Piston seizure
Crankshaft damage
Catastrophic engine failure

To avoid these issues, thorough inspection and repair should be part of every engine overhaul and maintenance schedule.

Our Inspection Process Includes:

1. Visual Inspection:

We look for visible cracks, discoloration due to overheating, and wear patterns.

2. Dimensional Check:

Using micrometers, bore gauges, and other precision tools, we check:
Big end bore diameter
Small end bore diameter
Overall length
Parallelism and twist

3. Crack Detection (NDT Testing):

We use Magnetic Particle Inspection (MPI) or Ultrasonic Testing (UT) to detect internal or surface-level cracks invisible to the naked eye.

4. Hardness Testing:

This helps determine whether the connecting rod material is still within acceptable strength limits after long-term usage.

5. Bolt and Bush Inspection:

We thoroughly inspect or replace the connecting rod bolts and bushes, which are often prone to fatigue and wear.

Industries We Serve

We serve a diverse client base in Asia, Africa, the Middle East, and Latin America, including marine, power generating, mining, cement, and heavy engineering industries.

Connecting Rod Of Daihatsu Ready For Dispatch — Connecting Rod ready for dispatch

Need Expert Inspection Services?

With over 45 years of experience, RA Power Solutions is your trusted partner for connecting rod inspection and repair. We provide services both on-site and in-house, ensuring minimum downtime and maximum quality.

For more information regarding engine connecting rods, used connecting rods, connecting rod inspection, engine block repair, please email us at rajshahani@rapowersolutions.com or info@rapowersolutions.com, or call us at +91 9582647131 or +91 9810012383.

Frequently Asked Questions (FAQs):

1. How often should connecting rods be inspected?

It is recommended to inspect connecting rods during every major engine overhaul or after every 10,000–15,000 hours of operation, depending on engine type.

2. What are the signs of a faulty connecting rod?

Excessive noise, engine knocking, vibration, and poor engine performance can indicate a problem with the connecting rod.

3. Can a cracked connecting rod be repaired?

Minor cracks can sometimes be repaired using certified welding and heat treatment. However, replacement is advised if the integrity is compromised.

4. Do you offer on-site connecting rod inspection?

Yes, RA Power Solutions specializes in on-site inspection and repair of connecting rods and other engine components globally.

5. What industries typically need connecting rod services?

We serve marine, power plants, cement, mining, oil & gas, and heavy industries with high-capacity engines.

The connecting rod is an important component of engine operation. It connects the piston to the crankshaft, converting the piston’s linear action into rotational motion. Over time and with continuous engine use, the connecting rod experiences high amounts of tension and wear. This makes routine inspection and maintenance of the connecting rod essential to ensure … Continue reading “Connecting Rod Inspection – A Critical Step in Engine Overhaul By RA Power Solutions”